gitback/pico-sdk
1
0
Fork 0
mirror of https://github.com/raspberrypi/pico-sdk.git synced 2024-09-29 03:28:49 +08:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
master
pico-sdk/MODULE.bazel

142 lines
6.3 KiB
Plaintext
Raw Permalink Normal View History

SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
module(
name = "pico-sdk",
version = "2.0.0",
)
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
bazel_dep(name = "platforms", version = "0.0.9")
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
bazel_dep(name = "bazel_skylib", version = "1.6.1")
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
bazel_dep(name = "rules_python", version = "0.22.1")
bazel_dep(name = "picotool", version = "2.0.0")
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
# Note: rules_cc is special-cased repository; a dependency on rules_cc in a
# module will not ensure that the root Bazel module has that same version of
# rules_cc. For that reason, this primarily acts as a FYI. You'll still need
# to explicitly list this dependency in your own project's MODULE.bazel file.
Expand bazel build to include configuration options and broader support. (#1731) * Add host Bazel build Updates target_compatible_with across the repo to ensure that wildcard builds for both host and rp2040 succeed. * Get unit tests building * Add Python script to identify build system differences Uses the build system tags to make it easier to identify differences between the CMake and Bazel builds. * Temporarily disable pico divider test * Support PICO_BARE_METAL in Bazel * Support PICO_NO_GC_SECTIONS in Bazel * Support boot2 configuration in Bazel Adds support for PICO_DEFAULT_BOOT_STAGE2 and PICO_DEFAULT_BOOT_STAGE2_FILE in the Bazel build. * Allowlist some CMake-only options * Support CXX configuration options in Bazel * Move multiple_choice_flag.bzl * Support all pico boards * Support linking multiple stdio implementations Changes the Bazel build so stdio implementations are no longer mutually exclusive. * Add PICO_BOOT_STAGE2_LINK_IMAGE * Support PICO_CMSIS_PATH in Bazel * Support PICO_USE_DEFAULT_MAX_PAGE_SIZE in Bazel * Silence PICO_CMSIS_VENDOR and PICO_CMSIS_DEVICE differences * Support PICO_STDIO_USB_CONNECT_WAIT_TIMEOUT_MS in Bazel * Properly support version defines * Support embedding binary info in Bazel * Embed build type in binary * Support different linker scripts in Bazel build * Finish out missing PICO_BUILD_DEFINE in Bazel build * Support PICO_NO_TARGET_NAME * Reorganize initial configuration options in Bazel Cleans up and reorganizes some of the initial configuration options added to the Bazel build so everything is consistent. * Add builds for pioasm and elf2uf2 * Use Python rules from rules_python * Actually link in output formats in pioasm tool * Make tools have public visibility * Add UF2 Bazel aspect * Add TODOs for pioasm/uf2 helpers * Fix compile flag typo * Update Bazel SDK configuration strings to match recent CMake changes * Fix pico_divider test * Clean up straggling TODOs * Clarify pico_stdio_test compatibility * Initial Bazel Pico W support * Add new files from develop * Clean up compatibility expressions in Bazel build * Clean up rp2 constraint handling in Bazel * More Bazel docs cleanup * Format Bazel build files * Consolidate transitions in the Pico SDK * Make every _allowlist_function_transition explicit * More docs cleanup * Add a few missing defines * Improve PICO_CONFIG_HEADER correctness in Bazel * Minor docs clarifications
2024-06-13 22:50:04 +08:00
bazel_dep(name = "rules_cc", version = "0.0.9")
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
# rules_cc v0.0.10 is not yet cut, so manually pull in the desired version.
# This does not apply to dependent projects, so it needs to be copied to your
# project's MODULE.bazel too.
archive_override(
module_name = "rules_cc",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
integrity = "sha256-zdQo/pQWKdIAPKSflBxOSWZNwCbc86T7SechKZo/3Xw=",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
strip_prefix = "rules_cc-1acf5213b6170f1f0133e273cb85ede0e732048f",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
urls = "https://github.com/bazelbuild/rules_cc/archive/1acf5213b6170f1f0133e273cb85ede0e732048f.tar.gz",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
http_archive = use_repo_rule("@bazel_tools//tools/build_defs/repo:http.bzl", "http_archive")
http_archive(
name = "arm_gcc_linux-x86_64",
build_file = "//bazel/toolchain:gcc_arm_none_eabi.BUILD",
sha256 = "6cd1bbc1d9ae57312bcd169ae283153a9572bd6a8e4eeae2fedfbc33b115fdbb",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
strip_prefix = "arm-gnu-toolchain-13.2.Rel1-x86_64-arm-none-eabi",
url = "https://developer.arm.com/-/media/Files/downloads/gnu/13.2.rel1/binrel/arm-gnu-toolchain-13.2.rel1-x86_64-arm-none-eabi.tar.xz",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
http_archive(
name = "arm_gcc_win-x86_64",
build_file = "//bazel/toolchain:gcc_arm_none_eabi.BUILD",
sha256 = "51d933f00578aa28016c5e3c84f94403274ea7915539f8e56c13e2196437d18f",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
strip_prefix = "arm-gnu-toolchain-13.2.Rel1-mingw-w64-i686-arm-none-eabi",
url = "https://developer.arm.com/-/media/Files/downloads/gnu/13.2.rel1/binrel/arm-gnu-toolchain-13.2.rel1-mingw-w64-i686-arm-none-eabi.zip",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
http_archive(
name = "arm_gcc_mac-x86_64",
build_file = "//bazel/toolchain:gcc_arm_none_eabi.BUILD",
sha256 = "075faa4f3e8eb45e59144858202351a28706f54a6ec17eedd88c9fb9412372cc",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
strip_prefix = "arm-gnu-toolchain-13.2.Rel1-darwin-x86_64-arm-none-eabi",
url = "https://developer.arm.com/-/media/Files/downloads/gnu/13.2.rel1/binrel/arm-gnu-toolchain-13.2.rel1-darwin-x86_64-arm-none-eabi.tar.xz",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
http_archive(
name = "arm_gcc_mac-aarch64",
build_file = "//bazel/toolchain:gcc_arm_none_eabi.BUILD",
sha256 = "39c44f8af42695b7b871df42e346c09fee670ea8dfc11f17083e296ea2b0d279",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
strip_prefix = "arm-gnu-toolchain-13.2.Rel1-darwin-arm64-arm-none-eabi",
url = "https://developer.arm.com/-/media/Files/downloads/gnu/13.2.rel1/binrel/arm-gnu-toolchain-13.2.rel1-darwin-arm64-arm-none-eabi.tar.xz",
)
http_archive(
name = "clang_linux-x86_64",
build_file = "//bazel/toolchain:clang.BUILD",
sha256 = "e12ee0db9226f5b4a4400c5eb2c0f757d7056181b651622b5453acb00105fd87",
type = "zip",
url = "https://chrome-infra-packages.appspot.com/dl/fuchsia/third_party/clang/linux-amd64/+/git_revision:248c53429427034f45705af60d47f3b1090c4799",
)
http_archive(
name = "clang_win-x86_64",
build_file = "//bazel/toolchain:clang.BUILD",
sha256 = "8c41e8b507f4dfede80842f98a716cac209f552064088fa1b7f4c64a1e547534",
type = "zip",
# Windows doesn't like `:` in the produced filename, so replace it with `%3A`.
url = "https://chrome-infra-packages.appspot.com/dl/fuchsia/third_party/clang/windows-amd64/+/git_revision:248c53429427034f45705af60d47f3b1090c4799".replace("git_revision:", "git_revision%3A"),
)
http_archive(
name = "clang_mac-x86_64",
build_file = "//bazel/toolchain:clang.BUILD",
sha256 = "1d92f52609d3c1e958fd56f5e9a68ab99b2042ddcc6e90a5eb5009cf7ac4897d",
type = "zip",
url = "https://chrome-infra-packages.appspot.com/dl/fuchsia/third_party/clang/mac-amd64/+/git_revision:248c53429427034f45705af60d47f3b1090c4799",
)
http_archive(
name = "clang_mac-aarch64",
build_file = "//bazel/toolchain:clang.BUILD",
sha256 = "53184680db7e0043a8fba1556c7644b8f5e6c8cdffa4436a92a8e8adb0f45b8d",
type = "zip",
url = "https://chrome-infra-packages.appspot.com/dl/fuchsia/third_party/clang/mac-arm64/+/git_revision:248c53429427034f45705af60d47f3b1090c4799",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
# TODO: Provide tinyusb as a proper Bazel module.
http_archive(
name = "tinyusb",
build_file = "//src/rp2_common/tinyusb:tinyusb.BUILD",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
sha256 = "d64728aef58b80d5ce3747cad133f520da46e2b7ea3aadfda0e981aba6b658b3",
strip_prefix = "tinyusb-4232642899362fa5e9cf0dc59bad6f1f6d32c563",
url = "https://github.com/hathach/tinyusb/archive/4232642899362fa5e9cf0dc59bad6f1f6d32c563.tar.gz",
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
Expand bazel build to include configuration options and broader support. (#1731) * Add host Bazel build Updates target_compatible_with across the repo to ensure that wildcard builds for both host and rp2040 succeed. * Get unit tests building * Add Python script to identify build system differences Uses the build system tags to make it easier to identify differences between the CMake and Bazel builds. * Temporarily disable pico divider test * Support PICO_BARE_METAL in Bazel * Support PICO_NO_GC_SECTIONS in Bazel * Support boot2 configuration in Bazel Adds support for PICO_DEFAULT_BOOT_STAGE2 and PICO_DEFAULT_BOOT_STAGE2_FILE in the Bazel build. * Allowlist some CMake-only options * Support CXX configuration options in Bazel * Move multiple_choice_flag.bzl * Support all pico boards * Support linking multiple stdio implementations Changes the Bazel build so stdio implementations are no longer mutually exclusive. * Add PICO_BOOT_STAGE2_LINK_IMAGE * Support PICO_CMSIS_PATH in Bazel * Support PICO_USE_DEFAULT_MAX_PAGE_SIZE in Bazel * Silence PICO_CMSIS_VENDOR and PICO_CMSIS_DEVICE differences * Support PICO_STDIO_USB_CONNECT_WAIT_TIMEOUT_MS in Bazel * Properly support version defines * Support embedding binary info in Bazel * Embed build type in binary * Support different linker scripts in Bazel build * Finish out missing PICO_BUILD_DEFINE in Bazel build * Support PICO_NO_TARGET_NAME * Reorganize initial configuration options in Bazel Cleans up and reorganizes some of the initial configuration options added to the Bazel build so everything is consistent. * Add builds for pioasm and elf2uf2 * Use Python rules from rules_python * Actually link in output formats in pioasm tool * Make tools have public visibility * Add UF2 Bazel aspect * Add TODOs for pioasm/uf2 helpers * Fix compile flag typo * Update Bazel SDK configuration strings to match recent CMake changes * Fix pico_divider test * Clean up straggling TODOs * Clarify pico_stdio_test compatibility * Initial Bazel Pico W support * Add new files from develop * Clean up compatibility expressions in Bazel build * Clean up rp2 constraint handling in Bazel * More Bazel docs cleanup * Format Bazel build files * Consolidate transitions in the Pico SDK * Make every _allowlist_function_transition explicit * More docs cleanup * Add a few missing defines * Improve PICO_CONFIG_HEADER correctness in Bazel * Minor docs clarifications
2024-06-13 22:50:04 +08:00
# TODO: Provide btstack as a proper Bazel module.
http_archive(
name = "btstack",
build_file = "//src/rp2_common/pico_btstack:btstack.BUILD",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
sha256 = "64e86d9cf82b346e743fe1d4818b9380712b17abdb3f2c3524e92464b5ef3d19",
strip_prefix = "btstack-2b49e57bd1fae85ac32ac1f41cdb7c794de335f6",
url = "https://github.com/bluekitchen/btstack/archive/2b49e57bd1fae85ac32ac1f41cdb7c794de335f6.tar.gz",
Expand bazel build to include configuration options and broader support. (#1731) * Add host Bazel build Updates target_compatible_with across the repo to ensure that wildcard builds for both host and rp2040 succeed. * Get unit tests building * Add Python script to identify build system differences Uses the build system tags to make it easier to identify differences between the CMake and Bazel builds. * Temporarily disable pico divider test * Support PICO_BARE_METAL in Bazel * Support PICO_NO_GC_SECTIONS in Bazel * Support boot2 configuration in Bazel Adds support for PICO_DEFAULT_BOOT_STAGE2 and PICO_DEFAULT_BOOT_STAGE2_FILE in the Bazel build. * Allowlist some CMake-only options * Support CXX configuration options in Bazel * Move multiple_choice_flag.bzl * Support all pico boards * Support linking multiple stdio implementations Changes the Bazel build so stdio implementations are no longer mutually exclusive. * Add PICO_BOOT_STAGE2_LINK_IMAGE * Support PICO_CMSIS_PATH in Bazel * Support PICO_USE_DEFAULT_MAX_PAGE_SIZE in Bazel * Silence PICO_CMSIS_VENDOR and PICO_CMSIS_DEVICE differences * Support PICO_STDIO_USB_CONNECT_WAIT_TIMEOUT_MS in Bazel * Properly support version defines * Support embedding binary info in Bazel * Embed build type in binary * Support different linker scripts in Bazel build * Finish out missing PICO_BUILD_DEFINE in Bazel build * Support PICO_NO_TARGET_NAME * Reorganize initial configuration options in Bazel Cleans up and reorganizes some of the initial configuration options added to the Bazel build so everything is consistent. * Add builds for pioasm and elf2uf2 * Use Python rules from rules_python * Actually link in output formats in pioasm tool * Make tools have public visibility * Add UF2 Bazel aspect * Add TODOs for pioasm/uf2 helpers * Fix compile flag typo * Update Bazel SDK configuration strings to match recent CMake changes * Fix pico_divider test * Clean up straggling TODOs * Clarify pico_stdio_test compatibility * Initial Bazel Pico W support * Add new files from develop * Clean up compatibility expressions in Bazel build * Clean up rp2 constraint handling in Bazel * More Bazel docs cleanup * Format Bazel build files * Consolidate transitions in the Pico SDK * Make every _allowlist_function_transition explicit * More docs cleanup * Add a few missing defines * Improve PICO_CONFIG_HEADER correctness in Bazel * Minor docs clarifications
2024-06-13 22:50:04 +08:00
)
# TODO: Provide btstack as a proper Bazel module.
http_archive(
name = "cyw43-driver",
build_file = "//src/rp2_common/pico_cyw43_driver:cyw43-driver.BUILD",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
sha256 = "0fcc7707fef95dd562d5572604713266613a27caeeae2f10afeccee9592a53ce",
strip_prefix = "cyw43-driver-faf36381bad1f668a30172b6336c9a970966ef4c",
url = "https://github.com/georgerobotics/cyw43-driver/archive/faf36381bad1f668a30172b6336c9a970966ef4c.tar.gz",
Expand bazel build to include configuration options and broader support. (#1731) * Add host Bazel build Updates target_compatible_with across the repo to ensure that wildcard builds for both host and rp2040 succeed. * Get unit tests building * Add Python script to identify build system differences Uses the build system tags to make it easier to identify differences between the CMake and Bazel builds. * Temporarily disable pico divider test * Support PICO_BARE_METAL in Bazel * Support PICO_NO_GC_SECTIONS in Bazel * Support boot2 configuration in Bazel Adds support for PICO_DEFAULT_BOOT_STAGE2 and PICO_DEFAULT_BOOT_STAGE2_FILE in the Bazel build. * Allowlist some CMake-only options * Support CXX configuration options in Bazel * Move multiple_choice_flag.bzl * Support all pico boards * Support linking multiple stdio implementations Changes the Bazel build so stdio implementations are no longer mutually exclusive. * Add PICO_BOOT_STAGE2_LINK_IMAGE * Support PICO_CMSIS_PATH in Bazel * Support PICO_USE_DEFAULT_MAX_PAGE_SIZE in Bazel * Silence PICO_CMSIS_VENDOR and PICO_CMSIS_DEVICE differences * Support PICO_STDIO_USB_CONNECT_WAIT_TIMEOUT_MS in Bazel * Properly support version defines * Support embedding binary info in Bazel * Embed build type in binary * Support different linker scripts in Bazel build * Finish out missing PICO_BUILD_DEFINE in Bazel build * Support PICO_NO_TARGET_NAME * Reorganize initial configuration options in Bazel Cleans up and reorganizes some of the initial configuration options added to the Bazel build so everything is consistent. * Add builds for pioasm and elf2uf2 * Use Python rules from rules_python * Actually link in output formats in pioasm tool * Make tools have public visibility * Add UF2 Bazel aspect * Add TODOs for pioasm/uf2 helpers * Fix compile flag typo * Update Bazel SDK configuration strings to match recent CMake changes * Fix pico_divider test * Clean up straggling TODOs * Clarify pico_stdio_test compatibility * Initial Bazel Pico W support * Add new files from develop * Clean up compatibility expressions in Bazel build * Clean up rp2 constraint handling in Bazel * More Bazel docs cleanup * Format Bazel build files * Consolidate transitions in the Pico SDK * Make every _allowlist_function_transition explicit * More docs cleanup * Add a few missing defines * Improve PICO_CONFIG_HEADER correctness in Bazel * Minor docs clarifications
2024-06-13 22:50:04 +08:00
)
# TODO: Provide lwip as a proper Bazel module.
http_archive(
name = "lwip",
build_file = "//src/rp2_common/pico_lwip:lwip.BUILD",
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
sha256 = "72856d557f72911cf6826ef745c23c54822df83a474557823241164a1d1361aa",
strip_prefix = "lwip-0a0452b2c39bdd91e252aef045c115f88f6ca773",
url = "https://github.com/lwip-tcpip/lwip/archive/0a0452b2c39bdd91e252aef045c115f88f6ca773.tar.gz",
Expand bazel build to include configuration options and broader support. (#1731) * Add host Bazel build Updates target_compatible_with across the repo to ensure that wildcard builds for both host and rp2040 succeed. * Get unit tests building * Add Python script to identify build system differences Uses the build system tags to make it easier to identify differences between the CMake and Bazel builds. * Temporarily disable pico divider test * Support PICO_BARE_METAL in Bazel * Support PICO_NO_GC_SECTIONS in Bazel * Support boot2 configuration in Bazel Adds support for PICO_DEFAULT_BOOT_STAGE2 and PICO_DEFAULT_BOOT_STAGE2_FILE in the Bazel build. * Allowlist some CMake-only options * Support CXX configuration options in Bazel * Move multiple_choice_flag.bzl * Support all pico boards * Support linking multiple stdio implementations Changes the Bazel build so stdio implementations are no longer mutually exclusive. * Add PICO_BOOT_STAGE2_LINK_IMAGE * Support PICO_CMSIS_PATH in Bazel * Support PICO_USE_DEFAULT_MAX_PAGE_SIZE in Bazel * Silence PICO_CMSIS_VENDOR and PICO_CMSIS_DEVICE differences * Support PICO_STDIO_USB_CONNECT_WAIT_TIMEOUT_MS in Bazel * Properly support version defines * Support embedding binary info in Bazel * Embed build type in binary * Support different linker scripts in Bazel build * Finish out missing PICO_BUILD_DEFINE in Bazel build * Support PICO_NO_TARGET_NAME * Reorganize initial configuration options in Bazel Cleans up and reorganizes some of the initial configuration options added to the Bazel build so everything is consistent. * Add builds for pioasm and elf2uf2 * Use Python rules from rules_python * Actually link in output formats in pioasm tool * Make tools have public visibility * Add UF2 Bazel aspect * Add TODOs for pioasm/uf2 helpers * Fix compile flag typo * Update Bazel SDK configuration strings to match recent CMake changes * Fix pico_divider test * Clean up straggling TODOs * Clarify pico_stdio_test compatibility * Initial Bazel Pico W support * Add new files from develop * Clean up compatibility expressions in Bazel build * Clean up rp2 constraint handling in Bazel * More Bazel docs cleanup * Format Bazel build files * Consolidate transitions in the Pico SDK * Make every _allowlist_function_transition explicit * More docs cleanup * Add a few missing defines * Improve PICO_CONFIG_HEADER correctness in Bazel * Minor docs clarifications
2024-06-13 22:50:04 +08:00
)
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
register_toolchains(
SDK 2.0.0 release
2024-08-08 19:02:04 +08:00
"//bazel/toolchain:linux-x86_64-rp2040",
"//bazel/toolchain:linux-x86_64-rp2350",
"//bazel/toolchain:win-x86_64-rp2040",
"//bazel/toolchain:win-x86_64-rp2350",
"//bazel/toolchain:mac-x86_64-rp2040",
"//bazel/toolchain:mac-x86_64-rp2350",
"//bazel/toolchain:mac-aarch64-rp2040",
"//bazel/toolchain:mac-aarch64-rp2350",
# Require users to opt-in to the Pico SDK's toolchains.
dev_dependency = True,
Introduce initial Bazel build (#1705) * Build boot_stage2 with Bazel Introduces the initial foundations of a Bazel build, including a toolchain, critical generated headers, platform patterns, and enough BUILD files to build boot_stage2. * Bazel libraries to support picotool * Move SDK defines to toolchain * Switch to `archive_override` in MODULE.bazel Uses archive_override where applicable to allow transitive bzlmod deps to propagate. * Multiplatform objcopy selection in Bazel build Makes an objcopy alias that redirects to the objcopy tool for the current exec platform, which allows boot_stage2 to build on Linux, macOS, and Windows. * Generate Bazel build files Adds initial set of generated Bazel build files. Note that these do not yet build, as dependency cycles are present. * Fix dependency cycles in Bazel build Fixes many dependency cycles, some were unintentionally created by the build file generator, others are true dependency cycles that require manual workarounds. * Silence warning in pico_stdio Bazel build Silences a stray warning in the Bazel build. * Fix wildcard Bazel build This makes `bazel build //...` succeed, and also prevents the fetching of toolchains that aren't compatible with the current execution environment (i.e. Windows computers will no longer try to download macOS toolchains). * Get the SDK working Finishes out the remainder of the work required to successfully compile a working blinky example. * Fix UART stdio dependencies in Bazel build Fixes some dependencies around pico_stdlib so that pico_stdlib links properly and UART stdio works. * Add linux support to Bazel build * Get Bazel deps from registry Adds external an external registry for resolving Bazel module dependencies. * Fix host configuration for picotool Provides the appropriate defines for host builds to support the picotool build. * Remove -ffreestanding from Bazel toolchain The -ffreestanding toolchain flag is quite strict, so remove it from the Bazel toolchain. * Remove unused .bzl file * Reduce Bazel compiler flags Cuts out most of the Bazel toolchain flags and only specifies the bare-minimum set of flags. Also, adds wrapper linker flags for functions the SDK wraps. * Get USB serial working Adds initial TinyUSB support and enough integration to get USB serial working. * Remove "Generated build file" Removes comments that indicates BUILD.bazel files are generated. This was used during initial bringup to indicate hand-crafted vs automatically generated BUILD.bazel files. * Do not build USB libraries unless configured Prevents USB libraries from being built unless the build is properly configured to use them. * Switch to rules_cc toolchains Moves toolchain configuration to use the new rules in rules_cc. * Minor cleanup in parse_version.py Cleans up trailing whitespace and runs the black formatter on parse_version.py. * Simplify constraint dimensions in Bazel build Consolidates the class/chip constraint settings to be a single constraint_setting with a config_setting that represents the rp2 class. * Update pin of rules_cc in Bazel build Includes a necessary fix for the target_compatible_with expression in the cc_toolchain to work as intended. * Move toolchains from pico.bzl to BUILD.bazel Moves toolchain definitions from pico.bzl to BUILD.bazel to make them easier to find and read. * Run buildifier on Bazel build files Fix trivial formatting issues by running buildifier on all BUILD.bazel files. * Make objcopy rule Makes a simple objcopy rule to remove direct references to the ARM toolchains. * Fix link flags in Bazel build Critical flags were not being applied to link steps. This applies -mcpu and -mthumb to the link steps to make the produced binaries work again. * Mention missing host build support * Fix various Bazel library rules * pico_bit_ops was incomplete. * pico_double and pico_float were trying to link in the "none" implementation. * Extend Bazel build documentation Improves documentation and comments across the Bazel build. * Clean up auxilary tools in Bazel build Switches genrules to use skylib rules to simplify things. Reworks version header generation to use the Bazel module version rather than parsing CMake. * Update boot_stage2 Bazel build file Moves `includes` to be enumerated on the correct library. * Add WORKSPACE version fallback WORKSPACE Bazel projects don't support querying module version, so add a fallback of '0.0.1-WORKSPACE' so the build can succeed. * Fix malloc handling in Bazel build * Fix Bazel dependency cycle in pico_malloc * Prevent malloc from being linked into boot_stage2 Prevents Bazel from ever trying to link malloc into the boot_stage2 binary. * Remove custom bootloader platform A dedicated boot_stage2 platform introduces a lot of complexity that needs to be more thought-through.
2024-06-05 07:50:32 +08:00
)
Reference in New Issue Copy Permalink